ΦΩΤΙΣΤΙΚΑ ΘΩΜΑΪΔΗΣ

Τρίτη 2 Απριλίου 2019

5 TIPS FOR CHOOSING THE BEST FAN FOR YOUR SPACE

1. Respect the room space:

When it comes to buying a fan, it is important to take into account the size of the room, the distance from the ceiling and its furniture. These measurements must be taken into account in accordance with the diameter of the blades of the fan in question:

– For rooms from 17.6 to 28 m2, the diameter has to be greater than 132cm
– For rooms from 13 to 17.6m2, the diameter has to be 107 to 132 cm
– And for smaller rooms, less than 13 m2, the diameter has to be less than 107 cm
– For outdoor spaces, such as terraces, entrances or porches, it is very important for the fan to have IP44 so that it is ready for environmental adversities such as humidity.

It is also important to respect the 20 cm distance between the fan blades and the furniture, or the fan and the wall. This is the minimum distance to ensure optimal air movement.

2. The importance of a sloping ceiling:

If the fan is going to be installed in a room with a sloping ceiling, we must take into account whether the chosen model is suitable for said room. The rosette of fans suitable for sloping ceilings enable certain degrees of sloping in order to adjust the stem. Its installation is the same when the ceiling is not sloping, but should just be adjusted as required.

3. Measurement and direction of the blades

The number of blades directly influences the amount of breeze: fewer blades, more air. For example, the model which has two blades, is ideal for big spaces. Fans with more blades, (for example five), serve to lightly cool rooms down.
Also, some fans change blade movement direction, and include the reverse function to improve the heating system in winter: there are two types of fans, some where this function is activated via the control and others where in order to change the direction of the blades, you need to activate the switch located above the motor.

4. DC motor

There are motors that are more efficient than others. Fans with a DC motor are usually characterised by being more efficient and enabling more speeds. While they are more silent, this does not mean that AC ones are not. Both are motors and, therefore, generate a small monotonous noise that is suitable for sleeping.

5. Consumption

Fan consumption depends primarily on two factors:

– Speed of operations. Most fans have at least three speeds, but there are models that have more, such as six. It depends on the room where you want to install it and this needs to be taken into account. If it is in a bedroom, it is better to have one that consumes little and makes little noise, but if it is for a common space, we will need one that has different speeds and projects much more air.

– Whether or not it has light. Fans with a light are a good option because they resolve two issues at the same time.

You can find all models from Faro Barcelona, in the store THOMAIDES.

Πηγή: FARO ES

Τετάρτη 19 Σεπτεμβρίου 2018

ΧΡΗΣΙΜΟΤΗΤΑ ΔΕΙΚΤΗ ΣΤΕΓΑΝΟΤΗΤΑΣ (IP) ΣΤΑ ΦΩΤΙΣΤΙΚΑ ΣΩΜΑΤΑ

The IP Code is an international standard for electrical equipment that classifies degrees of protection.
This code is made up of the letters IP (Ingress Protection) and two numbers. The first number indicates protection against solid bodies and the second refers to protection against liquid bodies.
Below we show each number and what it means according to its position.

first_number_ip

For example, if you are planning to light the garden, you can find below what lighting FARO BARCELONA recommend, depending on the area.

– Access points: The entrance to the garden and various areas it may lead to should be focused on and lit directly via wall or roof luminairs (sconces or recessed fixtures). Spotlights with motion and/or light sensors may also be used and are very useful, as they are only activated when needed.

– Gathering areas: Porches or areas designed for celebrations in the garden should be lit using sconces or pendant or suspension lamps, which will provide a unique touch.

– Pathways: We will use ground- or wall-recessed luminaires, preferably LED, for paths. Beacons, are also a highly aesthetic and sustainable option.

– Work areas: Designed for reading, barbecuing, workshops… According to experts, the best option for these areas is to use energy saving wall lamps (sconces), since they are light fixtures that will remain on for long periods of time. For less decorative areas such as the workshop or barbecue area, it is better to use simple sconces or spotlights, which provide a more adequate type of lighting for these purposes.

– Accentuated areas: To highlight objects, fountains, trees, sculptures, etc., the most suitable option is using small spotlights or stakes, as they can be mounted on the lawn and focused as desired.

– Decorative area: This involves creating a focal point in a specific space – lighting a wall or a specific part of the garden, for example. In this last example, the best option is using floor or portable lamps.Portable luminaires are extremely popular since they can be moved, have long cables, are practical, and add a very modern touch to any garden.

Lampposts are also a very good option for general lighting and creating a pleasant environment. Floor lamps are ideal for large areas. Their design combines perfectly with minimalist and very avant-garde gardens.

– Swimming pool area: Coloured floating lights are currently very popular. However, the best option for lighting the inside and the surrounding area of a swimming pool is to use ground or wall-recessed fixtures.

In conclusion, the luminaire must have a higher or lower IP (protection rating against water and solid objects), depending on where it is to be installed. IP23 will be enough for porches or semi-covered areas, whereas luminaires to be installed in a swimming pool should be rated IP68, which is the maximum protection against solid objects and prolonged immersion.

Πηγή: FARO BARCELONA